This week I was put in charge of the crew that was reinstalling the ADCP windows. It was more challenging than I was expecting. I had to really watch what the crew was doing to make sure everything was right and they were doing it exactly how we wanted. The first step was to put contact cement down on one side of the gasket to stick in place on the bottom of the hull. Then 5200 was put on the gasket and the glass was pressed on to it. There were then 30 though bolts put on. This was tricky because some had to be down in the transducer well putting on the nuts while some else was outside the hull torquing down the bolts. Once all the bots were in place the outer edge of the window was filled in with 5200. We had two of these windows to install. Once the 5200 cures we will fill the well with water to test for leaks. If there are no leaks then we will mount the transducer. 